top of page

Why You Shouldn't Choose a Floor Coating Company on Price Alone

Nov 11
4 min read

Updated: 3 days ago

When you're collecting quotes for a garage or commercial floor, it's natural to look at the bottom line first. And sometimes the numbers are far apart. One company comes in at a fair, competitive price, and another comes in at what seems like a steal.


We understand the appeal of the cheaper quote. But after more than 30 years in business, we've seen what happens next too many times. Here's what actually goes into a floor coating price, and why the lowest number often turns out to be the most expensive one.


“Bare Concrete Is Better Than Poorly Coated Concrete”


Our team says it all the time, and it's true. A bare slab may not look exciting, but it's stable. A poorly installed coating is a problem waiting to happen. When it fails, it peels, flakes, and lifts, and before anything new can go down, all of that failed material has to be removed.


That's the hidden cost of a cheap floor. We regularly meet customers who had their floors coated by a low-cost company, and within a year or two the coating started peeling up. Now they're paying a second time: once to remove the failed coating, and again to have it done right. A floor that seemed like a bargain ends up costing far more than doing it right the first time.


Before: a failed coating that couldn't stand up to daily use. After: the same floor, properly prepped and recoated by our crew.


What's Behind Our Pricing


We work hard to stay competitive on price. But we won't cut the corners that make a floor last. Here's what you're paying for when you choose Brilliant Epoxy Floors. (Learn more about us.)


Industrial surface prep on every floor. Every floor we install is prepared by industrial diamond grinding or shot blasting, with no exceptions. Many companies skip prep altogether or simply acid etch the concrete, which cleans the surface but doesn't open it up for the coating to grip. Mechanical prep creates a true profile that the coating can bond into, which is the single biggest factor in whether a floor lasts or peels. See our process.


Over 30 years of experience. We've been installing floors in Arizona for more than three decades. That experience shows up in every decision, from how we prep the slab to which system we recommend. Browse our portfolio to see the results.


The best product for every job. We aren't married to any one manufacturer. Instead of pushing a single brand, we choose the best-performing product for each application and industry, using proven, commercial-grade materials, not bargain-bin products. See the manufacturers we work with.


Certified technicians. Our techs hold AMPP Concrete Coating Inspector (CCI) Level 1 or Level 2 certification, an industry credential focused on how concrete coatings should be prepared, applied, and inspected. That training shows in every floor we install.


In-house, W-2 installers. Every installer on our crews is a W-2 employee of Brilliant Epoxy Floors, trained in-house to our standards. We don't hand your project off to subcontractors or whoever is available that week. The people on your floor know our systems and take pride in the result.


State-of-the-art equipment. Proper surface prep takes professional equipment. We invest in modern machinery so every floor starts with the kind of prep that coatings need to bond and last.


Two stocked warehouses. We keep all of our products stocked across two warehouses, so your project isn't delayed by backorders or substitutions, and the materials we promise are the materials we install.


A showroom you can visit. Want to see and touch the finishes before you decide? Our showroom lets you compare colors, textures, and systems in person, so you know exactly what you're getting.


What a “Too Good to Be True” Quote Usually Leaves Out


When a price is dramatically lower, something has to give. Usually it's one or more of these:

  • Little or no surface prep, or a quick acid etch instead of mechanical grinding or shot blasting, the number one cause of coating failure

  • Thin, low-quality materials that wear through or peel under hot tires

  • No crack or joint repair before coating

  • Untrained or temporary labor

  • No established business behind the work if something goes wrong


That last one matters more than most people realize. When a low-cost installer disappears, so does any help if something goes wrong. We've been here for over 30 years, and we stand behind every floor we install. If something isn't right, we'll make it right.


Each of those cuts saves money on day one, and costs you later.


Questions to Ask Before You Hire a Floor Coating Company


When you're comparing quotes, these questions will quickly show you who's cutting corners:

  • Are you licensed with the Arizona Registrar of Contractors? Ask for their ROC number and look it up on the ROC website.

  • How will you prepare my concrete? Listen for diamond grinding or shot blasting. “Clean and etch” is a red flag.

  • Are your installers employees or subcontractors? Ask who will actually be working on your floor.

  • What products do you use, and why? A good contractor can explain why a product is right for your specific space.

  • How long have you been in business?

  • Can I see your work in person? A showroom or nearby completed job lets you see the quality before you commit. (You can start with our portfolio.)


If a company can't give clear answers to these, the low price probably comes with a catch.


The Bottom Line


Price matters, and we respect that. That's why we stay competitive. But a floor coating is an investment in your home or business, and its value comes from how long it lasts. When you compare quotes, compare what's included, who's doing the work, and how long they've been doing it, not just the final number.


Want a quote that's competitive and built to last? Request a free site evaluation, call us at 480-203-2444, email info@brilliantaz.com, or visit our showroom at 16099 N. 82nd St. Suite B11, Scottsdale, AZ 85260.

Comments


bottom of page